CVS log for pkgsrc/archivers/p5-Compress-Bzip2/Makefile

Up to [NetBSD + pkgsrc-wip] / pkgsrc / archivers / p5-Compress-Bzip2

Request diff between arbitrary revisions - Display revisions graphically

Keyword substitution: kv
Default branch: MAIN

Set LICENSE to gnu-gpl-v2.

Revision bump after updating perl to 5.14.1

Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

Add DESTDIR support.

Update to 2.09:

2.00 Wed Apr 13 16:33:35 2005

This is a complete re-write of Compress::Bzip2.  I left the in-memory
compress routines much as is, compress and decompress.

(re)created by h2xs 1.23 with options
	-b 5.6.0 -n Compress::Bzip2 bzlib.h

I wanted Compress::Zlib compatibility cause I have s/w that uses
Compress::Zlib and I wanted an easy migration path, since bzlib gives
about 20-30% better compression on ascii files than gzip.

This is a 2.x release.  Since there was a change in authorship, I
figured I should bump the major version number.  I could have easily
given this a slightly different name.  Given the minimal functionality
of version 1, that didn't seem like a useful thing to do.  Heck,
version 1 doesn't even work with bzlib 1.x, you have to patch in the
BZ2_ prefixes, so my guess is that Compress::Bzip2 isn't being used
in a lot of places.

2.01 Sat Apr 23 2005
   - cleaned up for 64bit, HPUX PA-RISC 2.0W and itanium
   - fleshed out the Compress::Zlib compatibility, added a
     couple of tests for it.
   - added bzip2, bunzip2 and bzcat, which act like the bzip
     commands.
   - added some compatibility for windows, can't test it out really
   - added the bzlib library underneath
   - changed the test suite so that it does not rely on bzip2
     being installed.
   - added a test to the Makefile.PL to determine whether or
     not the internal Bzlib is necessary.

2.02 Sat Apr 23 2005
   - 2.01 rejected by PAUSE because the META.yml was invalid
   - learned how to do "make dist"

2.03 Sun Apr 24 2005
   - didn't have config.in in the MANIFEST, the tarball was unbuildable.
   - rewrote the INSTALL, README to give help on the config.in options
     for locating your bzip2 installation.

2.04 Mon Apr 25 2005
   - tested different styles of builds.  confirmed some errors in the
     Makefile.PL test for bzip2 that were pointed out by Sisyphus.
   - Sisyphus reported some changes necessary for windows builds.  I
     injected those changes into the code.  one of them, adding
     aTHX_ to the call to PerlIO_binmode seems like a perl version
     thing.
   - added tests for internal_bzlib, copied from bzip2 1.0.2.

2.05 Wed Apr 27 2005
   - cleaned up the pod so it's more presentable online.
   - win32 builds - the eye of the needle.  Sisyphus has been doing most of
     the work.
   - cater to win32 nmake - :: ok but $^ not
   - cater to win32 dmake - :: bad but $^ ok
   - cater to win32 - use File::Spec catfile and rel2abs all over the place

2.06 Fri Apr 29 2005
   - build for bzip2.exe fine tuning for win32 nmake

2.07 Sun May 1 2005
   - bzlib-src/Makefile.PL had a stupid mistake in it that shows up for
     win32 nmake.  I can't test that stuff out.  Plus, got some new
     info from Sisyphus, so tossed my scribble and put in something
     known to work.

   - implemented Compress::Bzip2 1.03 compatibility layer to encompass
     the post-1.00 development thread taken by Marco Carnut and David
     Robins.  Made an effort to include the three .t test files asis.

   - Why?  Cause I found that PerlIO::via::Bzip2, by Arjen Laarhoven,
     is built on the streaming interface of 1.03.  From looking over
     it, I gather it redirects a 1.03 compression/decompression stream
     to/from a file.  It doesn't do the extra bit of fiddling with the
     trailers to make the resultant file usable by the bzip2 commands.
     Additionally, the 1.03 decompress stream doesn't handle the pause
     when an embedded EOF marker is found, which is an issue for files
     larger than the buffer size (900k by default).

     So, I figured it would be easy to provide a compatibility layer
     for packages that use 1.03.  By using my stuff, the headers and
     trailers would be automatically taken care of, as would the EOF
     marker.  Something like PerlIO::via::Bzip2 would then
     interoperate with bzip2 commands.  Sure, I think bzread and bzwrite
     are better choices for file IO, but this is perl, right?  There has
     to be at least 10 ways to do the same thing.

2.08 Wed May 11 2005
   - Sisyphus got the win32 nmake problem licked.  merging his stuff in.

   - perldoc changes for bzip2 1.03 compatibility.

   - got ownership of the module on cpan

2.09 Tue Aug 9 2005
   - change email addy

   - patch for test 041-error.t, thanks to Dave Evans

   - prototype error for bzwrite, limit variable was not optional, thanks
     to Christian Drauch for pointing this out.

Point MAINTAINER to pkgsrc-users@NetBSD.org in the case where no
developer is officially maintaining the package.

The rationale for changing this from "tech-pkg" to "pkgsrc-users" is
that it implies that any user can try to maintain the package (by
submitting patches to the mailing list).  Since the folks most likely
to care about the package are the folks that want to use it or are
already using it, this would leverage the energy of users who aren't
developers.

Bump the PKGREVISIONs of all (638) packages that hardcode the locations
of Perl files to deal with the perl-5.8.7 update that moved all
pkgsrc-installed Perl files into the "vendor" directories.

Turn PERL5_PACKLIST into a relative path instead of an absolute path.
These paths are now relative to PERL5_PACKLIST_DIR, which currently
defaults to ${PERL5_SITEARCH}.  There is no change to the binary
packages.

Removed an empty line.

Remove USE_BUILDLINK3 and NO_BUILDLINK; these are no longer used.

since perl is now built with threads on most platforms, the perl archlib
module directory has changed (eg. "darwin-2level" vs.
"darwin-thread-multi-2level").

binary packages of perl modules need to be distinguishable between
being built against threaded perl and unthreaded perl, so bump the
PKGREVISION of all perl module packages and introduce
BUILDLINK_RECOMMENDED for perl as perl>=5.8.5nb5 so the correct
dependencies are registered and the binary packages are distinct.

addresses PR pkg/28619 from H. Todd Fujinaka.

Update p5-Compress-Bzip2 from version 1.01 to 1.02.

No change log available.

Libtool fix for PR pkg/26633, and other issues.  Update libtool to 1.5.10
in the process.  (More information on tech-pkg.)

Bump PKGREVISION and BUILDLINK_DEPENDS of all packages using libtool and
installing .la files.

Bump PKGREVISION (only) of all packages depending directly on the above
via a buildlink3 include.

bl3ify

Initial import of p5-Compress-Bzip2 1.01

Bzip2 bindings for Perl5. That means you can access the
Bzip2 library from your Perl scripts there by compressing ordinary
Perl strings.

Package imported from pkgsrc-wip.

Initial revision